dash_sdk::sdk

Struct SdkBuilder

source
pub struct SdkBuilder { /* private fields */ }
Expand description

Dash Platform SDK Builder, used to configure and SdkBuilder::build() the Sdk.

SdkBuilder implements a “builder” design pattern to allow configuration of the Sdk before it is instantiated. It allows creation of Sdk in two modes:

  • Normal: Connects to a remote Dash Platform node.
  • Mock: Uses a mock implementation of Dash Platform.

Mandatory steps of initialization in normal mode are:

  1. Create an instance of SdkBuilder with SdkBuilder::new()
  2. Configure the builder with SdkBuilder::with_core()
  3. Call SdkBuilder::build() to create the Sdk instance.

Implementations§

source§

impl SdkBuilder

source

pub fn new(addresses: AddressList) -> Self

Create a new SdkBuilder with provided address list.

source

pub fn new_mock() -> Self

Create a new SdkBuilder that will generate mock client.

source

pub fn new_testnet() -> Self

Create a new SdkBuilder instance preconfigured for testnet. NOT IMPLEMENTED YET.

This is a helper method that preconfigures SdkBuilder for testnet use. Use this method if you want to connect to Dash Platform testnet during development and testing of your solution.

source

pub fn new_mainnet() -> Self

Create a new SdkBuilder instance preconfigured mainnet (production network). NOT IMPLEMENTED YET.

This is a helper method that preconfigures SdkBuilder for production use. Use this method if you want to connect to Dash Platform mainnet with production-ready product.

source

pub fn with_network(self, network: Network) -> Self

Configure network type.

Defaults to Network::Dash which is mainnet.

source

pub fn with_ca_certificate(self, pem_certificate: Certificate) -> Self

Configure CA certificate to use when verifying TLS connections.

Used mainly for testing purposes and local networks.

If not set, uses standard system CA certificates.

source

pub fn with_ca_certificate_file( self, certificate_file_path: impl AsRef<Path>, ) -> Result<Self>

Load CA certificate from file.

This is a convenience method that reads the certificate from a file and sets it using SdkBuilder::with_ca_certificate().

source

pub fn with_settings(self, settings: RequestSettings) -> Self

Configure request settings.

Tune request settings used to connect to the Dash Platform.

Defaults to RequestSettings::default().

See RequestSettings for more information.

source

pub fn with_version(self, version: &'static PlatformVersion) -> Self

Configure platform version.

Select specific version of Dash Platform to use.

Defaults to [PlatformVersion::latest()].

source

pub fn with_context_provider<C: ContextProvider + 'static>( self, context_provider: C, ) -> Self

Configure context provider to use.

Context provider is used to retrieve data contracts and quorum public keys from application state. It should be implemented by the user of this SDK to provide stateful information about the application.

See ContextProvider for more information and GrpcContextProvider for an example implementation.

source

pub fn with_cancellation_token(self, cancel_token: CancellationToken) -> Self

Set cancellation token that will be used by the Sdk.

Once that cancellation token is cancelled, all pending requests shall teriminate.

source

pub fn with_core(self, ip: &str, port: u16, user: &str, password: &str) -> Self

Use Dash Core as a wallet and context provider.

This is a convenience method that configures the SDK to use Dash Core as a wallet and context provider.

For more control over the configuration, use [SdkBuilder::with_wallet()] and SdkBuilder::with_context_provider().

This is temporary implementation, intended for development purposes.

source

pub fn with_height_tolerance(self, tolerance: Option<u64>) -> Self

Change number of blocks difference allowed between the last height and the height received in current response.

If height received in response metadata is behind previously seen height by more than this value, the node is considered stale, and the request will fail.

If None, the height is not checked.

Note that this feature doesn’t guarantee that you are getting latest data, but it significantly decreases probability of getting old data.

This is set to 1 by default.

source

pub fn with_time_tolerance(self, tolerance_ms: Option<u64>) -> Self

How many milliseconds difference is allowed between the time received in response and current local time. If the received time differs from local time by more than this value, the remote node is stale.

If None, the time is not checked.

This is set to None by default.

Note that enabling this check can cause issues if the local time is not synchronized with the network time, when the network is stalled or time between blocks increases significantly.

Selecting a safe value for this parameter depends on maximum time between blocks mined on the network. For example, if the network is configured to mine a block every maximum 3 minutes, setting this value to a bit more than 6 minutes (to account for misbehaving proposers, network delays and local time synchronization issues) should be safe.

source

pub fn with_dump_dir(self, dump_dir: &Path) -> Self

Configure directory where dumps of all requests and responses will be saved. Useful for debugging.

This function will create the directory if it does not exist and save dumps of

  • all requests and responses - in files named msg-*.json
  • retrieved quorum public keys - in files named quorum_pubkey-*.json
  • retrieved data contracts - in files named data_contract-*.json

These files can be used together with MockDashPlatformSdk to replay the requests and responses. See MockDashPlatformSdk::load_expectations() for more information.

Available only when mocks feature is enabled.

source

pub fn build(self) -> Result<Sdk, Error>

Build the Sdk instance.

This method will create the Sdk instance based on the configuration provided to the builder.

§Errors

This method will return an error if the Sdk cannot be created.

Trait Implementations§

source§

impl Default for SdkBuilder

source§

fn default() -> Self

Create default SdkBuilder that will create a mock client.

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> CostsExt for T

§

fn wrap_with_cost(self, cost: OperationCost) -> CostContext<Self>
where Self: Sized,

Wraps any value into a CostContext object with provided costs.
§

fn wrap_fn_cost( self, f: impl FnOnce(&Self) -> OperationCost, ) -> CostContext<Self>
where Self: Sized,

Wraps any value into CostContext object with costs computed using the value getting wrapped.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<T> IntoRequest<T> for T

source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Same for T

source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
§

impl<T, U> TryFromVersioned<U> for T
where T: TryFrom<U>,

§

type Error = <T as TryFrom<U>>::Error

The type returned in the event of a conversion error.
§

fn try_from_versioned( value: U, _grove_version: &GroveVersion, ) -> Result<T, <T as TryFromVersioned<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T, U> TryIntoPlatformVersioned<U> for T
where U: TryFromPlatformVersioned<T>,

§

type Error = <U as TryFromPlatformVersioned<T>>::Error

The type returned in the event of a conversion error.
§

fn try_into_platform_versioned( self, platform_version: &PlatformVersion, ) -> Result<U, <U as TryFromPlatformVersioned<T>>::Error>

Performs the conversion.
§

impl<T, U> TryIntoVersioned<U> for T
where U: TryFromVersioned<T>,

§

type Error = <U as TryFromVersioned<T>>::Error

The type returned in the event of a conversion error.
§

fn try_into_versioned( self, grove_version: &GroveVersion, ) -> Result<U, <U as TryFromVersioned<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more